Linksys WPC54A Manual do Utilizador Página 8

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 7
Wireless PC Card
6. The Setup Wizard will automatically select a channel for your use in the
Ad-Hoc Mode at this time. If you want to specify a channel, after you
install the Wireless PC Card, refer to “Chapter 7:Configuration of the
Wireless PC Card, “and use the WLAN Monitor.
7. Enter in the name of your SSID (Service Set Identifier) for your Ad-Hoc or
Infrastructure setting. The SSID must be identical for all points in the net-
work. The SSID may be up to 32 characters in length, may include any
character on the keyboard, but is case sensitive. If you are unsure, use the
default value of “linksys.” Click the Next button. (See Figure 3-8.)
Instant Wireless
TM
Series
9
Figure 3-8
Unlike wired networks, wireless networks have two different modes in which
they may be set up: Infrastructure and Ad-Hoc. Choosing between these two
modes depends on whether or not the wireless network needs to share data or
peripherals with a wired network or not.
If the computers on the wireless network need to be accessible by a wired net-
work or need to share a peripheral, such as a printer, with the wired network
computers, the wireless network should be set up in the Infrastructure mode.
The basis of Infrastructure mode centers around an access point, which serves
as the main point of communications in a wireless network (see Figure 3-6).
Access points transmit data to PCs that are equipped with wireless network
cards, which can
roam within a cer-
tain radial range of
the access point.
Multiple access
points can be
arranged to work
in succession to
extend the roam-
ing range, and can
be set up to com-
municate with
your Ethernet
hardware as well.
If the wireless network is relatively small and needs to share resources only
with the other computers on the wireless network, then the Ad-Hoc mode can
be used (shown in Figure 3-7). Ad-Hoc mode allows computers that are
equipped with Wireless PC Cards to communicate directly with each other and
eliminate the need for an access point. The drawback of this mode is that wire-
less-equipped computers are not able to communicate with computers on a
wired network. And,
communication
between the wireless-
equipped computers
is limited by the dis-
tance and interfer-
ence directly between
them.
8
Ad-Hoc versus Infrastructure Mode
Figure 3-6
Figure 3-7
Vista de página 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Comentários a estes Manuais

Sem comentários

Amerex 05606 manuály

Uživatelské manuály a uživatelské příručky pro Bezpečnost Amerex 05606.
Poskytujeme 1 manuály pdf Amerex 05606 ke stažení zdarma podle typů dokumentů: Uživatelský manuál






Další produkty a příručky pro Bezpečnost Amerex

Modely Typ Dokumentu
05605 Uživatelský manuál   Amerex 05605 User Manual, 14 stránky
05608 Uživatelský manuál   Amerex 05608 User Manual, 12 stránky
05612 Uživatelský manuál   Amerex 05612 User Manual, 11 stránky
05614 Uživatelský manuál   Amerex 05614 User Manual, 10 stránky
05616 Uživatelský manuál   Amerex 05616 User Manual, 9 stránky
05615 Uživatelský manuál   Amerex 05615 User Manual, 10 stránky
05617 Uživatelský manuál   Amerex 05617 User Manual, 12 stránky
05618 Uživatelský manuál   Amerex 05618 User Manual, 8 stránky
05619 Uživatelský manuál   Amerex 05619 User Manual, 10 stránky
05620 Uživatelský manuál   Amerex 05620 User Manual, 8 stránky
08220 Uživatelský manuál   Amerex 08220 User Manual, 12 stránky
14425 Uživatelský manuál   Amerex 14425 User Manual, 8 stránky
16303 Uživatelský manuál   Amerex 16303 User Manual, 6 stránky
16303 Uživatelský manuál   Amerex 16303 Manual del usuario, 6 stránky
16424 Uživatelský manuál   Amerex 16424 Manual del usuario, 2 stránky
14795 Uživatelský manuál   Amerex 14795 User Manual, 16 stránky
18764 Uživatelský manuál   Amerex 18764 User Manual, 13 stránky
16672 Uživatelský manuál   Amerex 16672 User Manual, 11 stránky
13259 Uživatelský manuál   Amerex 13259 User Manual, 4 stránky