Instant EtherFast©Series10/100 USB NetworkAdapterModel No.:USB100TXUser Guide
10/100 USB Network Adapter146. After ensuring that all of the listed networkcomponents are installed on your system, inthe Primary Network Logon box s
10/100 USB Network Adapter1613. A Logon window will appear, requiring you to enter a User name andPassword. Make up a user name and password (if you h
10/100 USB Network Adapter7. When you're done, click on the Apply button, followed by OK. Repeatsteps 1-7 for any drive or folder you desire to s
4. In the following screen, you will direct Windows to the proper locationfor the driver. Select “Search for the best driver for your device(Recommend
1. Once you are back at the Windows Millennium desktop, click on yourtaskbar's Start button, then Settings, then Control Panel, then double-clic
7. Click on the Identification tab. Type thename of your computer in the ComputerName box. Choose a name that is uniquefrom the other computer names o
13. A Logon window will appear, requiring you to enter a User name andPassword. Make up a user name and password (if you haven’t already)and click OK.
7. When you're done, click on the Apply button, followed by OK. Repeatsteps 1-7 for any drive or folder you desire to share on the network.You ha
10/100 USB Network Adapter303. The Install Hardware Device Drivers dialog box will appear. WhenLinksys USB Adapter is displayed, select “Search for a
10/100 USB Network Adapter6. The Driver File Search Results dialog box will appear. Click Next.7. The Completing the Found New Hardware Wizard dialog
COPYRIGHT & TRADEMARKS Copyright © 2001 Linksys, All Rights Reserved. 10/100 USB Network Adapter is a reg-istered trademark of Linksys. Microsoft
10/100 USB Network Adapter• Click on the NetBIOS tab. Put a check next to I want to enable NetBIOSover IPX/SPX and click OK. Click OK again.• After Wi
10/100 USB Network Adapter36Novell NetWare 3.x Client Setup for Windows 98The instructions below explain how to set up the regular Novell NetWare 3.xc
10/100 USB Network Adapter384. Remove any instance of the name Linksys in the box. This includesIPX/SPX…Linksys, NetBEUI…Linksys, and TCP/IP…Linksys.
10/100 USB Network Adapter408. If Network Adapters is listed, then expand it by clicking on the plus [+]sign and remove all devices with the name Link
10/100 USB Network Adapter425. Right-click on Linksys EtherFast 10/100 USB Network Adapter. Acontext menu should open (see the example below).6. First
10/100 USB Network Adapter44IPX/SPX-compatible ProtocolClick the Add button. Choose Protocol and click the Add button. SelectManufacturer and choose M
10/100 USB Network Adapter46• Straight-Through Cabling•Cross-Over CablingCrimping Your Own Network CablesLinksys EtherFast®Series45Twisted-Pair Cablin
10/100 USB Network Adapter48Customer SupportFor help with the installation or operation of your EtherFast 10/100 USBNetwork Adapter, contact Linksys C
© Copyright 2001 Linksys,All Rights Reserved.http://www.linksys.com
10/100 USB Network AdapterAppendix 35Client for Microsoft Setup for Windows 98 35Novell NetWare 3.x Client Setup for Windows 98 36Starting Over in Win
10/100 USB Network AdapterPackage C• One 10/100 USB Network Adapter• One Standard USB Cable• One Driver Diskette• One User Guide and Registration Card
10/100 USB Network Adapter4TX/RX The TX/RX LED will flicker whenever network data ispassing through the 10/100 USB Network Adapter.LINK The Link LED w
10/100 USB Network Adapter6Installing the EtherFast10/100 USB NetworkAdapterOverviewThe following instructions will help you physically connect your c
10/100 USB Network Adapter8Windows 98 Installation &SetupOverviewAfter physically installing the 10/100 USB Network Adapter in your comput-er, fol
10/100 USB Network Adapter106. A window will open saying that Windows is now ready to install theLinksys EtherFast 10/100 USB Network Adapter driver.
10/100 USB Network Adapter12Network Component Configuration1. Once you are back at the Windows 98 desktop, click on your taskbar'sStart button,
Comentários a estes Manuais